Elevate Your Shooting

In Break-Action Shotguns:

Installation is quick and easy. Always start by checking that your firearm is completely unloaded. We also recommend cleaning the bore of your shotgun, or at the very least run a bore brush and a couple of patches through to remove any excess carbon build-up. Simply press the appropriate adapter into your shotguns chamber, making sure the sleeve seats completely into the chamber. When using an adapter designed for rimfire cartridges like .22 LR, we recommend aligning the top of the adapter with the top of your shotgun barrel. 

In Pump-Action and Semi-Auto Shotguns:

Always start be checking that your firearm is completely unloaded. Start by removing the barrel from the receiver. As with break-action shotguns, we recommend cleaning the bore of your shotgun, or at the very least running a bore brush followed by a couple of patches through to remove excess carbon build-up. With the barrel removed, begin pressing your adapter into the chamber of your shotgun. The trick is to take great care to line up the adapter's extractor reliefs, with those of your shotgun. If done correctly, the extractor will ride smoothly past the rim of the adapter travelling through the relief. We again recommend that when using a rimfire adapter, the bore be aligned with the top of the barrel.